LICENSED, BONDED & INSURED

We serve Weatherford, TX homeowners and business owners safely and ethically​

Spray Foam Insulation Weatherford, TX

Welcome to Weatherford Spray Foam Insulation. We take pride in serving the residents of Weatherford and the surrounding areas with spray foam insulation services. Spray foam is a great insulation option and it is becoming a popular choice among homeowners and business owners. Spray foam insulation in Weatherford, TX, has higher installation costs because of the process of installation.
​
However, spray insulation has plenty of benefits and can be used in many areas of a building. It is long-lasting, eco-friendly, has a high R-value, and is the only insulation that can create a complete air seal wherever it is sprayed. If you want to opt for spray foam insulation in Weatherford, TX, you should have some knowledge about it so that you can make an informed decision with all your insulation projects. 

Privacy Policy

What is Spray Foam Insulation?

Spray foam insulation in the Weatherford, TX is essentially a combination of two chemicals that is polyol resin and isocyanates. It is also known as spray polyurethane foam. Polyurethane was first invented by Otto Bayer and it became a popular insulation material by the 1970s.
​
When polyol resin and isocyanates are combined they react with each other and form spray foam insulation. When foam insulation is sprayed, it expands 30 to 60 times in volume and fills every crack and crevice. It takes only a few minutes for spray foam to harden and create a complete air seal.

If you are thinking of installing spray foam insulation in Weatherford, TX it is best that you hire a professional insulation contractor for the job.

​What is R-Value?

R-value is the ability of a material to resist the flow of heat. All insulation materials have their own R-value. All insulation materials prevent the entry of outside air and loss of condition inside air. The R-value of cellulose insulation is between R-3 and R-3.8 per inch. And the R-value for fiberglass insulation is between R-2.2 and R-3.84 inch depending on whether it is blown in fiberglass or fiberglass bats.

Spray foam insulation has a high R-value and the R-value for open cell spray foam insulation is approximately R-3.74 per inch whereas the R-value for closed cell spray foam can go as high as R-6.5 to R-7 per inch.
​
Usually, a higher R-value indicates better insulation properties. For most areas, a single layer of closed cell spray foam insulation is required to meet the necessary R-value. But depending on what insulation you are using other than spray foam; you will need several layers of that material to achieve the required R-value.

The R-value for the roof, basement, crawl space, and wall will differ. Your insulation contractor will know the correct R-values for spray foam insulation in Weatherford, TX according to the building code.

Types of spray foam insulation

Spray foam insulation in Weatherford, TX comes in two types, that is open cell spray foam and closed cell spray foam insulation. Let’s take a look at the differences between these two types of insulation.

:Open cell spray foam and Closed cell spray foam

• Open-cell spray foam insulation in Weatherford, TX is relatively less expensive than closed cell spray foam.
• In open cell spray foam insulation, the cells are deliberately left open whereas in closed cell spray foam the cells are completely encapsulated.
• Closed cell spray foam is more rigid and dense in nature because of the arrangement of the cells and thus making open cell spray foam comparatively more flexible.
  Open cell spray foam is usually considered to be soundproof insulation because it absorbs sound and can be used as a sound dampener. It is great for use in home theaters, music rooms, and areas where you want to diminish noise.
• Open cell spray foam expands up to 3 inches in thickness and in most cases only one coating is required, whereas closed cell spray foam increases up to 1 inch in thickness when sprayed.
• The R-value of open cell spray foam is R-3.7 per inch whereas closed cell spray foam has a much higher R-value that goes up to R-6.5 to R-7 per inch.

It does not mean that one type is better than the other. If you are confused when choosing between open cell and closed cell spray foam, speak to your insulation contractor for advice. Both open cell and closed cell spray foam insulation in Weatherford, TX are good as they both create an air seal.

Benefits of Spray Foam Insulation

Spray foam insulation in Weatherford, TX has many benefits. Before opting for spray foam insulation, it is important to know the advantages.

Air sealant

Only spray foam insulation in Weatherford TX is capable of creating a complete air seal when it is installed.

​Unlike other types of insulation like cellulose and fiberglass that still allow air to pass through it, spray foam is the only one that prevents the conditioned air that is inside your home from escaping. If you ever feel that the space inside your home is getting too tight, you can always turn on the bathroom and kitchen exhaust.

High R-value

​Spray foam insulation has a high R-value per inch and when using closed cell spray foam you will only need to use a single layer to achieve the necessary R-value.

​The R-value of spray foam insulation will never decrease and will always remain constant.

Moisture impermeable

Since spray foam is an air sealant, it also blocks moisture and does not allow air to pass through.

​This is good because it minimizes the chances of mildew and mold developing. Your home will never have problems due to moisture-related problems and this reduces the chances of moisture-related diseases.

Sound barrier

Open-cell spray foam insulation in Weatherford, TX is used as a sound dampening material as well as an insulation material.

​Since the cells are open in open cell spray foam, it absorbs all of the sound waves and does not allow it to leave or enter the room.

Reduces energy bills

​Spray foam insulation in Weatherford, TX plays a significant role in reducing how much you spend on energy bills.

​This is because when used inside a home or commercial building, spray foam insulation creates a complete air seal and does not allow the conditioned air to escape. This reduces the strain on your HVAC systems and you will have to spend a lot less in annual heating and cooling costs.

Eco-friendly

Nowadays the spray foam insulation products in Weatherford, TX are eco-friendly and cause the least harm to nature.

​In addition to this it lasts for a long time and there are lesser chances of waste material ending up in the landfill.

Long lasting

When spray foam insulation in Weatherford, TX is installed it will last as long as the building structure is intact.

​This could be up to 80 years or more. Compared to this, if you have cellulose or fiberglass insulation you will need to replace it in as little as 15 years.

Where Can Spray Foam Insulation Be Used?

Spray foam insulation in Weatherford, TX is one of the most versatile insulations and can be used in almost all areas in a home, pole barn or commercial building. When it comes to home insulation, here are the most popular areas where spray foam is used.

• Attics - There are many benefits of using spray foam insulation as attic insulation. This includes reducing your energy bills by keeping in all the conditioned air.

• Crawl spaces and basements - Crawl space insulation is essential in creating a building envelope and it helps to create a comfortable environment in your home by eliminating cold floors.

• Around your HVAC system - Insulating around condensers, pipes, ductwork and floor registers optimizes your HVAC system.

• Rim joists - Rim joists are also known as band joists and they are used to secure floor joist ends. Spray foam insulation is ideal to seal rim joists and cracks.

• Garages - Often a garage is not insulated as it is not considered to be a part of the living space. However, insulating a garage can help create a better building envelope. If the walls of your garage are insulated, consider insulating the garage door and include weather-stripping at the bottom of the door.
• Wall insulation - Spray foam insulation in Weatherford, TX can be added to existing walls. If you want to install wall insulation without tearing down the walls, you will have to opt for expanding foam spray foam.

Where to Avoid Spray Foam Insulation?

Spray foam insulation should be avoided in certain places. When installing spray foam insulation in Weatherford, TX, here are some tips to keep in mind.
​

• Near electrical boxes- Spray foam should not be used near an electrical box as there is the danger that it might get into the box and jam up the parts. This could result in a fire as the parts can get overheated.

• Next to ceiling light boxes- The area near recessed ceiling light boxes is heated and spray foam should be avoided here. Always consult a professional spray foam insulation contractor to find out if you are in doubt.
• If you have a history of respiratory and skin diseases- if you have a history of skin or respiratory diseases and previous exposure to isocyanates, it is best to avoid spray foam insulation in Weatherford, TX. 

DIY Spray Foam Insulation

Are you considering a DIY spray foam insulation job in Weatherford, TX? While it may sound like a great option, a DIY spray foam insulation project may not always turn out perfect. Here are some pros and cons to keep in mind.

​Advantages

• You can begin the work when you like. To hire a good insulation contractor you would probably have to wait for a few weeks as they get booked very soon.
• A DIY spray foam project would definitely be a cheaper option. Keep in mind that the cost of spray foam insulation in Weatherford, TX is high mainly due to high labor costs.
• Spray foam insulation kits are easily available in local hardware stores.
  
• A DIY project is perfect for small spaces. 

​Disadvantages

• You will have to wear protective gear when using spray foam insulation in Weatherford, TX. Insulation vapors are toxic and can irritate the eyes and skin. Insulation contractors have all the necessary gear that is required for installing spray foam.
• When it is being applied, spray foam insulation can catch fire, thus it is a potential hazard. This is why insulation contractors carefully check the site for any open flames before installing spray foam insulation in Weatherford, TX.
• Since spray foam is made of two chemicals, it has to be mixed at the right consistency. It cannot be too wet or too sticky. When it is not the right consistency, spray foam will not stick to the substrate well.
• If the old crawl space insulation, attic insulation or wall insulation needs to be removed, it is best left up to the professionals who know proper removal and disposal of the materials.
  
• If you hire a good insulation contractor, they will provide you with an ample warranty just in case anything goes wrong.

Cost of Spray Foam Insulation

The cost of spray foam insulation in Weatherford, TX depends on whether you opt for open cell spray foam or closed cell spray insulation.

Open cell spray foam costs between $0.44 and $0.65 per board foot and closed cell spray foam costs between $1 and $1.5 per board foot. The average cost of spray foam insulation is $2,500 and it falls between $1,200 and $3,700.
​
The average cost to install spray foam insulation is between $1.50 and $4.90 per square foot. You will notice that the installation cost is much higher than the cost of the raw materials itself. This is because the installation of spray foam insulation in Weatherford, TX is labor-intensive and it included various factors like the preparation and set-up, the installation, clean up and trash removal.

Contact Us

If you need spray foam insulation in Weatherford, TX installed contact us for home insulation or commercial insulation. Our team is well versed in installing open cell as well as closed cell spray foam. Contact us as soon as possible for an assessment and a free quote.

Call (817) 646-4473